-
Vendor:GritShift
Heavy Hitter QS165 60h V3 Billet Gear Box Cover
The Heavy Hitter QS165 60h V3 Billet Gear Box Cover is a precision-machined billet aluminum gearbox cover built for the QS165 60h V3 motor. Designed with integrated cooling fins to manage gearbox fluid temps and slightly increase oil capacity, it adds real function where...- $172.89
- $172.89
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter QS165 60h V3 Billet Gear Box Cover
The Heavy Hitter QS165 60h V3 Billet Gear Box Cover is a precision-machined billet aluminum gearbox cover built for the QS165 60h V3 motor. Designed with integrated cooling fins to manage gearbox fluid temps and slightly increase oil capacity, it adds real function where...- $172.89
- $172.89
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Surron Billet Footpeg Support Brace With O-Rings
The Heavy Hitter Billet Footpeg Support Brace is a 7075 aluminum reinforcement brace that prevents footpeg bracket bending and failure on the Sur Ron LBX and Segway X260/X160. Riding while standing puts significant load on the stock footpeg brackets, this brace distributes that load...- $16.99
- $16.99
- Unit price
- per
-
Silver
-
Black
-
Vendor:GritShift
Heavy Hitter Surron V2 Skid Plate
A redesigned 7075-T6 billet aluminum skid plate built to fit all motors, with re-optimized bash plate angles for enduro riding and tighter controller fitment to protect phase wires from sticks and rocks. At 3.42 lbs with a 10mm bash plate tested to withstand over...- $199.99
$219.89- $199.99
- Unit price
- per
-
Red
-
Gold
-
Silver
-
Black
-
Vendor:GritShift
Heavy Hitter Talaria Billet Race Suspension Linkage
A 7075 billet aluminum rear suspension linkage with steel bushings, pre-assembled with new bearings, bushings, and seals. Designed to replace the known weak point in the stock Talaria suspension setup that causes noise, play, and eventual bearing and linkage failure. Engineered with a 4mm...- $82.99
- $82.99
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Talaria Sting Billet Suspension Triangle
The Heavy Hitter Talaria Sting Billet Suspension Triangle is a 7075 billet aluminum replacement suspension triangle engineered to replace the weak factory cast aluminum unit. Three times stronger than OEM, it handles big jumps, hard enduro, and stunt riding without the cracking and failure...- $89.99
- $89.99
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Titanium 1.5" Linkage Upgrade
The Heavy Hitter Titanium Linkage is a Ti-6Al-4V titanium rear suspension linkage upgrade for the Sur Ron LBX, Segway X160/X260, Ventus ONE+, and 79Bike Falcon. Designed with a 1.5" lift that balances front grip, rake angle, and rear grip, it replaces the stock linkage...- $299.99
$389.99- $299.99
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Titanium Direct Mount Riser
The Heavy Hitter Titanium Direct Mount Riser is a Ti-6Al-4V titanium stem riser that adds 2" of rise to 31.8mm handlebars on standard mountain bike dual crown forks. An evolution of the original Heavy Hitter riser, it delivers the same ergonomic and steering improvements...- $199.89
$329.89- $199.89
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Ultra Bee Billet Racing Triangle (Fits All Shocks)
The Heavy Hitter Ultra Bee Billet Racing Triangle is a 7075-T6 aluminum suspension triangle for the Sur Ron Ultra Bee, CAD-tested to 10,000 lbs of static force after weight optimization. Tested with all shocks on the market for guaranteed fitment compatibility. Two years of...- $89.99
- $89.99
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Ultra Bee F/R Brake Rotor Upgrade
The Heavy Hitter Ultra Bee Brake Rotor is a 240mm stainless steel rotor upgrade for the front or rear wheel of the Sur Ron Ultra Bee, engineered for superior stopping power, improved heat dissipation, and reduced brake fade during intense riding. Matches the cut...- $49.99
- $49.99
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Ultra Bee Racing Linkage
The Heavy Hitter Ultra Bee Racing Linkage is a 7075-T6 aluminum rear shock linkage upgrade for the Sur Ron Ultra Bee, engineered to optimize suspension performance for improved off-road handling. Built with stainless steel bearing sleeves, press-fit nylon bearing seals for water ingress protection,...- $99.89
- $99.89
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter V1 Talaria Skid Plate
A 7075-T6 billet aluminum skid plate engineered to protect the most vulnerable part of your e-moto the motor. Built with a 10mm thick bash plate tested to withstand over 6,000 lbs of force, replaceable bash plates, and strategic ventilation to keep the motor cool...- From $149.99
$219.89- From $149.99
- Unit price
- per
-
Blue
-
Silver
-
Gold
-
Black
-
Vendor:GritShift
Heavy Hitter V2 Talaria Skid Plate
The Heavy Hitter V2 Skid Plate is a billet aluminum motor protection system built for e-moto riders who push hard on technical terrain. Designed to shield the motor from rocks, roots, logs, and hard impacts with a 10mm thick replaceable bash plate, it is...- $199.89
- $199.89
- Unit price
- per
-
Silver
-
Black
-
Purple
-
Blue
-
Vendor:GritShift
Heavy Hitter V2 Talaria Skid Plate
The Heavy Hitter V2 Skid Plate is a billet aluminum motor protection system built for e-moto riders who push hard on technical terrain. Designed to shield the motor from rocks, roots, logs, and hard impacts with a 10mm thick replaceable bash plate, it is...- $199.89
- $199.89
- Unit price
- per
-
Silver
-
Black
-
Purple
-
Blue
-
Vendor:GritShift
Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit
The Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit is a complete drivetrain conversion built to replace the stock belt drive on the Zero XB. Designed for riders running upgraded motors or controllers who need a drivetrain that can handle serious torque...- $99.89
- $99.89
- Unit price
- per
-
Vendor:GritShift
Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit
The Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit is a complete drivetrain conversion built to replace the stock belt drive on the Zero XB. Designed for riders running upgraded motors or controllers who need a drivetrain that can handle serious torque...- $99.89
- $99.89
- Unit price
- per
-
Vendor:GritShift
Sintered MTB Brake Pads - Front and Rear Kit OEM Replacement
A sintered brake pad set for smaller OEM MTB Style calipers, sold as a complete front and rear kit with 2 front pads, 2 rear pads, steel backing plates, and high-quality springs. Quiet, heat-resistant, and designed to reduce brake fade during heavy use. A...- $18.99
$26.89- $18.99
- Unit price
- per
Vendor:Titanium Surron
Titanium Full Body Kit - Ventus One
Custom titanium bolt kits for the Ventus One models. Ships same day from Chicago (most orders depending upon time of order) Anodized/ PVD coated to perfection Increased corrosion resistance Made from certified Titanium Grade 5 6AL-4V Rolled threads for greater fatigue strength Greater strength...
- $239.99
- $239.99
- Unit price
- per
-
Blue
-
Burnt Blue
-
Black
-
Gold
Vendor:GritShift
Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit
The Heavy Hitter Zero XB 420 Primary Chain Drive Conversion Kit is a complete drivetrain conversion built to replace the stock belt drive on the Zero XB. Designed for riders running upgraded motors or controllers who need a drivetrain that can handle serious torque...
- $99.89
- $99.89
- Unit price
- per
Vendor:GritShift
Heavy Hitter V2 Talaria Skid Plate
The Heavy Hitter V2 Skid Plate is a billet aluminum motor protection system built for e-moto riders who push hard on technical terrain. Designed to shield the motor from rocks, roots, logs, and hard impacts with a 10mm thick replaceable bash plate, it is...
- $199.89
- $199.89
- Unit price
- per
-
Silver
-
Black
-
Purple
-
Blue
- Choosing a selection results in a full page refresh.